About Kathleen georgeff

This author has not yet filled in any details.
So far Kathleen georgeff has created 45 blog entries.

New Install – Farmer’s Table, Smithfield VA

2020-04-14T14:39:14-04:00February 4th, 2020|Categories: Installs|

Come out to Farmer’s Table for Fantastic Red Angus Beef Burgers and a wonderful ice cream experience!
Russell, Bobby and the crew are doing it right, you will not be disappointed.
Great job Team Farmer’s Table!
Located in Cypress Run Plaza at 13416 Benn’s Church Blvd, Smithfield Virginia.

Model C717 – Soft Serve Freezer Twist, Heat Treatment

2020-05-12T18:22:05-04:00September 12th, 2016|Categories: Soft Serve|

Taylor C717 Soft Serve Freezer

Taylor-logo

The Taylor C717 offers all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C717 Soft Serve Freezer Twist, Heat Treatment Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up

to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix

below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Taylor C717 Specifications

Electrical

Two dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

  • Cone Dispenser
  • Drain Adaptor (for ease of rinsing & cleaning)
  • Draw Valve Lock Kit
  • Faucet
  • Hopper Locks
  • Hopper Agitators
  • Panel Spinner
  • Syrup Rail (Integrated)
  • Syrup Rail Kit (side mount)

Model C716 – Soft Serve Freezer Twist, Pump, Heat Treatment

2020-05-12T18:51:46-04:00September 12th, 2016|Categories: Soft Serve|

Taylor C716 Soft Serve Freezer

Taylor-logo

The Taylor C716 offers all the popular soft serve variations from low to non-fat ice creams or yogurt. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C716 Soft Serve Freezer Features

Offer all the popular soft serve variations from low to non-fat ice creams or yogurt. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of

servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Taylor C716 Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. (BTUs may vary depending on compressor used.

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

  • Cone Dispenser
  • Drain Adaptor (for ease of rinsing & cleaning)
  • Draw Valve Lock Kit
  • Faucet
  • Hopper Locks
  • Panel Spinner
  • Syrup Rail (Integrated)
  • Syrup Rail Kit (side mount)

Model C709 – Single Flavor, Heat Treatment

2020-05-17T21:35:09-04:00September 12th, 2016|Categories: Soft Serve|

Taylor C709 Soft Serve Freezer

Taylor-logo

The Taylor C709 Soft Serve Freezer offers all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C709 Soft Serve Freezer Single Flavor, Heat Treatment Features

Offer all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically goes into Standby mode to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense soft serve desserts. Soft lock out features improve reliability. Temperatures in the hopper or freezing cylinder may be displayed at any point of operation. History of temperatures and times during the last 366 heat cycles may be viewed from the fluorescent display.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C709 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against a wall to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance. Optional air discharge chute directs heated air exhaust upwards. No clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT.

Options

  • Cart with casters-height to top of hopper cover: 59-5/8” (1515 mm)
  • Cone Dispenser
  • Decals – Vanilla or Flavor Burst Cone
  • Hopper Locks
  • Legs – [increase height of unit by 4-1/4” (108 mm)]
  • Syrup Rail (front mount requires special cart with rear door)
  • Syrup Rail Kit (side mount)
  • Top Air Discharge Chute (air cooled only)

Model C708 – Soft Serve Freezer, Heat Treatment

2020-05-17T21:35:14-04:00September 12th, 2016|Categories: Soft Serve|

Taylor C708 Soft Serve Freezer

Taylor-logo

The Taylor C708 offers all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

C708 Soft Serve Freezer Single Flavor, Pump, Heat Treatment Features

Offer all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix below 41ºF (5ºC) in Auto and Standby modes. Simplified air/mix pump delivers the precise amount of air and mix to the freezing cylinder, and reduces operator parts.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically goes into Standby mode to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense soft serve desserts. Soft lock out features improve reliability. Temperatures in the hopper or freezing cylinder may be displayed at any point of operation. History of temperatures and times during the last 366 heat cycles may be viewed from the fluorescent display.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C708 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart

for the proper electrical requirements. Manufactured to be permanently

connected. Consult your local Taylor distributor for cord & receptacle

specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against

a wall to prevent recirculation of warm air. Minimum air clearances must be

met to assure adequate air flow for optimum performance.

Optional air discharge chute directs heated air exhaust upwards. No

clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT.

Options

  • Cart with casters-height to top of hopper cover: 59-5/8” (1515 mm)
  • Cone Dispenser
  • Decals – Vanilla or Flavor Burst Cone
  • Hopper Locks
  • Legs – [increase height of unit by 4-1/4” (108 mm)]
  • Syrup Rail (front mount requires special cart with rear door)
  • Syrup Rail Kit (side mount)
  • Top Air Discharge Chute (air cooled only)

Model C152 – Soft Serve Freezer Single Flavor Machine – New Crown Series Design

2020-06-23T15:26:48-04:00September 7th, 2016|Categories: Soft Serve|

Taylor C152 Soft Serve Freezer Single Flavor Machine

Taylor-logo

The Taylor C152 offers all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C152 Soft Serve Freezer Single Flavor Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet.

Freezing Cylinder

One, 1.5 quart (1.4 liter).

Mix Hopper

One, 8 quart (7.6 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

The Mix Low and Mix Out light alerts the operator to add mix. An audible alarm may be enabled to sound when mix is low.

Electronic Controls

Softech™ is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C152 Soft Serve Freezer Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected. Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.

Beater Motor

One, 0.5 HP

Refrigeration System

One, 3,000 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134A. (BTUs may vary based on application)

Air Cooled

Minimum 4″ (102 mm) on both sides. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Options

  • Cone Dispenser
  • 4″ Legs (Must install skirt on right side of unit to prevent recirculation of warm air)

Model L810 Electric 3 Platen 36″ Grill

2020-05-12T22:17:55-04:00August 25th, 2016|Categories: Grills|

Taylor L810 Electric Two-Sided Grill

Taylor-logo

Best Seller!

The Taylor L810 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L810 Electric Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations saving time and eliminating operator error.

Upper Platens

Three upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Each zone has three independent heating elements, and two in the upper platen to assure even temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L810 Specifications

Electrical

See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for receptacle specifications as local codes allow. Restraining cable included.

Accessories

  • Cleaner (1qt)
  • Grease cans (two, mount on each side)
  • Release sheets; includes clips and retainer (one box of 9)
  • Squeegee (one)

Options

  • Cleaning Pads (10 qty.)
  • Cleaning Pad Holder
  • Gap Gage (0.255)
  • Grill Scraper
  • Tool Holder

Model L811 Gas/Electric 3 Platen 36″ Grill

2020-05-17T21:42:52-04:00August 25th, 2016|Categories: Grills|

Taylor L811 Gas/Electric 3 Platen 36

Taylor-logo

Best Seller!

The Taylor L811 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L811 Gas Lower Cook Surface/Electric Upper Platens Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations, saving time and eliminating operator error.

Upper Platens

Three upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Three independent controlled gas infra-red burners heat the lower cook surface. Each upper platen contains two independently controlled electric heating elements. Together these thermal systems provide even plate temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L811 Gas Lower Cook Surface/Electric Upper Platens Two-Sided Grill Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Consult your local Taylor distributor for receptacle specifications as local codes allow.

Gas

Three ceramic infrared burners; 25,000 BTUH each. Manifold pressure; 3.5” w.c. natural; 10.5” w.c. propane

Includes:

Flue deflector and restraining cable 3/4″ Flexible gas inlet hose, with female fitting connection for ½” pipe thread on grill and female fitting for 1″ pipe thread at wall.

Accessories

  • Cleaner (1qt)
  • Grease cans (two, mount on each side)
  • Release sheets; includes clips and retainer (one box of 9)
  • Squeegee (one)

Options

  • Cleaning Pads (10 qty.)
  • Cleaning Pad Holder
  • Gap Gage (0.255)
  • Grill Scraper
  • Tool Holder

Model L812 Electric 2 Platen 36″ Grill

2020-05-17T21:42:59-04:00August 25th, 2016|Categories: Grills|

Taylor L812 Electric 2 Platen 36

Taylor-logo

Best Seller!

The Taylor L812 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L812 Electric Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations saving time and eliminating operator error.

Upper Platens

Two upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Each zone has three independent heating elements, and two in the upper platen to assure even temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L812 Electric Two-Sided Grill Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for receptacle specifications as local codes allow. Restraining cable included.

Accessories

  • Cleaner (1qt)
  • Grease cans (two, mount on each side)
  • Release sheets; includes clips and retainer (one box of 9)
  • Squeegee (one)

Options

  • Cleaning Pads (10 qty.)
  • Cleaning Pad Holder
  • Gap Gage (0.255)
  • Grill Scraper
  • Tool Holder

Model L813 Gas/Electric 2 Platen 36″ Grill

2020-05-17T21:43:12-04:00August 25th, 2016|Categories: Grills|

L813 Gas/Electric 2 Platen 36

Taylor-logo

Best Seller!

The Taylor L813 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L813 Gas Lower Cook Surface / Electric Upper Platens Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations, saving time and eliminating operator error.

Upper Platens

Two upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Three independent controlled gas infra-red burners heat the lower cook surface. Each upper platen contains two independenty controlled electric heating elements. Together these thermal systems provide even plate temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L813 Gas Lower Cook Surface / Electric Upper Platens Two-Sided Grill Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Consult your local Taylor distributor for receptacle specifications as local codes allow.

Gas

Three ceramic infrared burners; 25,000 BTUH each. Manifold pressure; 3.5” w.c. natural; 10.5” w.c. propane

Includes:

Flue deflector and restraining cable 3/4″ Flexible gas inlet hose, with female fitting connection for ½” pipe thread on grill and female fitting for 1″ pipe thread at wall

Accessories

  • Cleaner (1qt)
  • Grease cans (two, mount on each side)
  • Release sheets; includes clips and retainer (one box of 9)
  • Squeegee (one)

Options

  • Cleaning Pads (10 qty.)
  • Cleaning Pad Holder
  • Gap Gage (0.255)
  • Grill Scraper
  • Tool Holder